TAG DMS Switch Home for Lumen/CenturyLink

DMS Switch



● DMS FANS & TRAYS	● DMS BLOWERS (.pdf)	● DMS DUMB TERMINALS


● DMS LAMPS (.pdf)	● DMS PRE-CHARGE TOOL (.pdf)	● DMS DRIVES

● DMS (.pdf)
11" x 17" sheet w/ MAT Codes for DMS
Fans, Terminals & Solid State Drives

DMS Fans & Trays

return to top

Universal Mounting for
NT3X90AA, NT3X90AB,
NT3X90AC & NT3X90AF
cooling units

- No 24VAC Inverters
- No Sensor Paddles

*** NEW ***
TAG Universal DMS-100 Fan Tray

# TFT-3X9013T (.pdf)
TAG Universal DMS-100 3X9013 Fan Tray
Includes: (1) Brand New Fan Tray w/ Universal Mounting Holes, (5) TF-DMS03, DMS-100 48VDC Fans w/ TTL Tach & 3 Wire Plug, (1) Fan Control Board with Built in Sensors (no paddles needed), Wiring Labels, Mounting Hardware, (1) Wiring Harness w/ Connector, NT3X90AA/AB & NT3X90AF Adapter Cables & Installation Guide

LUMEN/CLK MAT # 1492217

TRAY INSTALLATION VIDEO (NT3X90AC)

TRAY INSTALLATION VIDEO (NT3X90AF)

TRAY CONVERSION INSTALLATION VIDEO (NT3X90AA/AB)

TFT-3X9013T Installation Guide (.pdf)

DMS-100

# TF-DMS01 (.pdf)
48V Fan for DMS-100 NT3X90AC / NTBX63AA Fan Trays
w/ Power Prongs & (4) Threaded Mounting Holes
(screws included)

LUMEN/CLK MAT # 1330636

DMS-1U

# TF-DMS02 (.pdf)
48V Fan for DMS-1U NT3X90AC / NTBX63AA Fan Trays
w/ Power Prongs & (4) Clear, Unthreaded Mounting Holes

LUMEN/CLK MAT # 1341504

New Kit

DMS-100 24VAC to 48VDC Fan Tray Conversion Kits

# TFT-DMS48KIT4 (.pdf)
Nortel DMS-100 (NT3X90AA / NT3X90AB), 24VAC to 48VDC Fan Tray Conversion Kit 4

LUMEN/CLK MAT # 1456790

NEW KIT Includes:
(5) TF-DMS05P, DMS-100 48VDC Fans w/ 2 Wire Plug,(1) Fan Control Board w/ built in Sensors (no paddles needed) (includes cabling, mounting & jumpers), Control Board Schematic Label, Frame Block Wiring Labels & Conversion Installation Guide)

Conversion Installation Guide (KIT 4)

DMS-100

# TF-DMS03 (.pdf)
48V Fan for DMS-100 Tray
w/ TTL Tach & 3 Wire Plug

(use in Nortel NT3X90AF Fan Trays)

LUMEN/CLK MAT # 1330361

DMS-100

# TFC-3X90AF-01 (.pdf)
DMS-100, Alarm Control Board Replacement

(use in Nortel NT3X90AF Fan Trays)

LUMEN/CLK MAT # 1475822

DMS-100 24VAC

# TF-DMS04AC (.pdf)
24 VAC Fan for DMS-100 Tray
w/ Power Prongs

(use in Nortel NT3X90AA / NT3X90AB Fan Trays)

LUMEN/CLK MAT # 1341495

DMS-10

# TF-DMS10-01 (.pdf)
DMS-10, 48V Replacement Fan w/ Power Prongs

LUMEN/CLK MAT # 1341506

DMS-100

# TF-DMS-NTRX91 (.pdf)
DMS-100, 48V Replacement Fan
w/ 3 Wire Plug

(use in DMS-100 NTRX91AA / NT0X91AA fan units
(MVIE and CSDM bays), CLEI: ENMYACM)

LUMEN/CLK MAT # 1349234

CARRIER VoIP

# TF-DMS-FOS (.pdf)
48V Replacement Fan for Nortel IW SPM-IP
NTLX56AA Fan Assemblies

(used in Nortel IW SPM-IP NTLX55AA cooling units)
(fan only, arm assembly is not included)

LUMEN/CLK MAT # 1341507

CARRIER VoIP

# TF-MG9K-01 (.pdf)
Nortel / GENBAND Media Gateway 9000,
48V Replacement Fan
w/ 3 Wire Plug

(use in NTNY18AA Cooling Unit)

LUMEN/CLK MAT # 1359401

DMS Blowers

return to top

DMS-100 DPCC SUPERNODE BLOWER "SQUIRREL CAGE"

# TF-DMSLGN5 (.pdf)
DMS-100 DPCC SuperNode Blower
"Squirrel Cage" Replacement
w/ Internal Sensor
(use in NT9X01XX DPCC, (replaces A0345301))

LUMEN/CLK MAT # 1355241

DMS Dumb Terminals

return to top

VT100 COMPATIBLE
DUAL RS-232 INPUTS
PRINTER OUTPUT
LOW POWER
RTIF & MAP

DMS (Dual Session) (.pdf)

● Practice (document # 590089A-002 )
(model # TT-DCAP , TT-DCAP-DMSKIT)

TT-DCAP
LUMEN/CLK MAT # 1332260
Terminal, Monitor & Keyboard only

TT-DCAP-DMSKIT
LUMEN/CLK MAT # 1332219
Terminal, Monitor & Keyboard
(includes (2) Current Loop Adapters)

VT100 COMPATIBLE
SINGLE RS-232 INPUT
PRINTER OUTPUT
LOW POWER
RTIF OR MAP

DMS (Single Session) (.pdf)

● Practice (document # 590088A-001)
(model # TT-SCAP-DMSKIT)

LUMEN/CLK MAT # 1332218

# 400725SB2 (.pdf)
DMS Quick Connect Current Loop Adapter Cable w/ DEC Connector

LUMEN/CLK MAT # 1332198

● Tag's Current Loop Adapter (# 400725SB2) is used to program and troubleshoot a DMS. A hardwire adapter (# 400725SBW) is also available.

DMS Drives

return to top

DMS-100 DAT DRIVES ***NEW MATCODE***

● Nortel DMS-100 DAT (NTLX07AA) Drive Solutions from TAG (.pdf)

TAG can REPLACE failing / broken Nortel DMS-100 DAT Drive in XA-CORE, NTLX07AA Modules.

NEBS Certified - NEW SOLID STATE DRIVE AVAILABLE FROM TAG

EXISTING MODULE w/ NEW SOLID STATE DRIVE

TAG MODEL #

USED IN NTLX07AA MODULE (HECI ENPQA1B1AA)

TSDT-NTLX07-01

LUMEN/CLK MAT #
1495798

Solid State Replacement for:
Nortel DMS-100
(HECI ENPQA1B1AA)
XA-CORE, NTLX07AA,
DAT Tape Drive

Includes: 4Gb Industrial Compact Flash Card (# TSD-CF-04)

DAT Drive Install Guide (.pdf)

DMS-100 SLM DRIVES (HD & QIC TAPE)

● Nortel DMS-100 SLM (NT9X44AD) Drive Solutions from TAG (.pdf)


NEBS Certified - NEW SOLID STATE DRIVES AVAILABLE FROM TAG
TAG MODEL #	USED IN NT9X44AD MODULE (HECI ENPQAZV1AA) - (1 HD & 1 TAPE DRIVE)
	Install Guide (.pdf)
TSD-9X44AD-01 LUMEN/CLK MAT # 1457324	Solid State Replacement for: DMS-100 SLM, NT9X44AD (HECI ENPQAZV1AA), Hard Drive
TSDT-9X44AD-02 LUMEN/CLK MAT # 1457386	Solid State Replacement for: DMS-100 SLM, NT9X44AD (HECI ENPQAZV1AA), QIC Tape Drive Includes: 4Gb Industrial Compact Flash Card (# TSD-CF-04)

DMS-10 DRIVES (HD & MO)

● TAG can REPLACE the failing / broken Nortel DMS-10 Hard Drive in the NT8T90BB Module & the Magneto-Optical (MO) Drive in the NT4T32BA Module with a NEW Solid State Drive.

NEBS Certified - NEW SOLID STATE DRIVES AVAILABLE FROM TAG
NT8T90BB MODULE w/ EXISTING DRIVE	TAG MODEL #	USED IN NT8T90BB MODULE (HECI EMI2CLCBAA)
	TSD-8T90BB (.pdf) LUMEN/CLK MAT # R1350768	Solid State Replacement for: Nortel DMS-10 NT8T90BB (HECI EMI2CLCBAA) Hard Drive Hard Drive Install Guide (.pdf)
NT4T32BA MODULE w/ EXISTING DRIVE	TAG MODEL #	USED IN NT4T32BA MODULE (HECI EMCPKL0BAA)
	TSDT-4T32BA (.pdf) LUMEN/CLK MAT # R1350767	Solid State Replacement for: Nortel DMS-10 NT4T32BA (Fujitsu MCF3064 SS) (HECI EMCPKL0BAA) Magneto-Optical (MO) Drive Includes: 4Gb Industrial Compact Flash Card (# TSD-CF-04) MO Drive Install Guide (.pdf)

DMS Lamps

return to top

	DMS REPLACEMENT LAMPS
	# TLMP-DMFA-10 (.pdf) DMS Fan Alarm Replacement Lamp, 24V ("Fan Fail" / "Frame Fail") (QTY of 10) LUMEN/CLK MAT # 1474165 # TLMP-DMFA-25 (.pdf) DMS Fan Alarm Replacement Lamp, 24V ("Fan Fail" / "Frame Fail") (QTY of 25) LUMEN/CLK MAT # 1474166

	# TLMP-DMSA-10 (.pdf) DMS Aisle Alarm Replacement Lamp, 48V (QTY of 10) LUMEN/CLK MAT # 1474167

DMS Pre-Charge Tool

return to top

# T-DMSTBT (.pdf)
DMS-10/100 Pre-Charge Tool
(replacement for NTA0600512)

LUMEN/CLK MAT # 1463935

● TAG's # T-DMSTBT is used to pre-charge shelf power capacitors on a DMS-10/100 switch. This allows a new fuse to be installed without seeing full in-rush surge current. The indicator light goes out when it is safe to install the fuse.

Contact a TAG sales representative today at: 856-753-8585

Lumen Home l Contact Us l TAG Home